Focus on solvent recycling & oil cleaning, well sold all over the world for many years!
Solvent Recycling Machine
Centrifugal Oil Cleaner
VOC Recycling System
Home > Centrifugal Oil Cleaner > Hy90 Centrifugal oil cleaners
Hongyi Hy90 Centrifugal Oil Cleaner effectively removes fine dirt from oil to keep the oil clean.
It is widely used for industrial fluids/oils cleaning, such as cold forming, wire drawing, quenching, forging, honing, reaming, grinding, turbine oil; compressor oil; gear oil; transmission oil; water glycol based cutting oils; hydraulic oil; straight cutting oil; test bed oils, etc.

 

Type
Rotor dirt holding capacity
Rotor oil volume
Minimum oil Feed pipe size
Minimum oil Drain pipe size
Hy90
0.9 L
1.5 L
Ø 19 mm internal
Ø 76 mm internal

 

Principle of Operation

hy30 Centrifugal Oil Cleaner

Oil is pumped into the centrifuge and directed into the rotor of the centrifuge. The centrifugal rotor is connected to the motor drive directly. The motor drives the rotor spinning and the rotor rotates quickly. The centrifugal force in the rotor causes the dirt particles present accelerate radially and deposit on the internal wall of the rotor. In the course of operation these deposits form a thick cake.
Centrifugal force is capable of removing a wide range of particles extending into sub-micron range. The removal of particles by centrifugal force is based on their relative density; therefore there is no restriction on contaminant size.
A barrier filtration device removes particles from oil based on filter element. Hongyi centrifugal oil cleaner is not a barrier filtration device; it has no filter element and no need filtration media to remove contaminant particles.

 

hy30 Centrifugal Oil Cleaner

The Benefits

  • Improved purity of the oil
  • Extended oil life change period
  • Increased engine/machinery Life
  • Reduces engine/machinery wear
  • Reduces maintenance costs
  • Cuts waste disposal costs
  • Reduces application downtime
  • Maximized in-service time for machinery
  • Very short investment recovery period & fast return on investment
  • No replacement element & recurring cost
  • Reduced contamination in oil
  • Less load on oil filters & heat exchangers
  • Less maintenance of filters & heat exchangers – operational / cost benefit
  • Less wear of quench oil transfer pumps – operational & cost saving
  • Less furnace downtime
  • Increased production
  • Reduces total cost of ownership

Application

Hongyi Centrifugal Oil Cleaners --- the ingenious solution for many applications!

Centrifugal force is capable of removing a wide range of particles extending into sub-micron range. The removal of particles by centrifugal force is based on their relative density; therefore there is no restriction on contaminant size.
A barrier filtration device removes particles from oil based on filter element. Hongyi centrifugal oil cleaner is not a barrier filtration device; it has no filter element and no need filtration media to remove contaminant particles.

Installation Scheme

There are two kinds of centrifugal oil cleaner installation scheme available as below, and also welcome to customize according to customer's specific requirements.

hy30 Centrifugal Oil Cleaner

hy30 Centrifugal Oil Cleaner

Application Cases

hy30 Centrifugal Oil Cleaner