Focus on solvent recycling & oil cleaning, well sold all over the world for many years!
Solvent Recycling Machine
Centrifugal Oil Cleaner
VOC Recycling System
Home > Solvent Recycling Equipment > Hy40Ex Solvent Recycling Systems
Model
Capacity
20 L
40 L
60 L
80 L
90 L
125 L
250 L
450 L

 

Hy40Ex Solvent Recycling Systems

Hongyi® Hy40Ex Solvent Recycling Systems recycles the used solvent or dirty solvent on the distillation recycling operating principle, and is widely used in various industries that use organic solvent as cleaning agent, such as dirty solvent from cleaning the spray gun, trichloroethylene from cleaning electronic products, toluene, anhydrous alcohol, IPA used as cleaning the optical lens etc., is very good for the environment.

There are standard machines from 20L, 40L, 60L, 80L, 90L and 250L up to 450L vessel volume and custom made machine, and auxiliary equipment, such as feeding device, vacuum device and distillation bags.

The solvent recycling machine may reduce your dependence on solvent procurement and help you to save a lot of time and money.

Technical Specifications of Hy40Ex Solvent Recycling Systems

Model
Hy40Ex Solvent Recycling Systems
Capacity
40 L
Operating temperature
50-210°C
Thermo-oil heating
integrated
Voltage, frequency
380V/50-60Hz (1Ph)
power input, average(Kw)
3.0
width(mm)
950
length(mm)
750
height(mm)
1200
Net weight approx(Kg)
140
  • It is suited to equip with the vacuum, the feeding device and the recycling bags. You are welcome to customize products.
  • Nylon and woven Teflon liners are available for the distillation bucket, can be custom-made.
  • The cooling system of Hy40Ex Solvent Recycling Systems can be custom-made and changed to the water cooling system according to the requirements of customers.
  • The power supply voltage is optional, can be custom-made such as 110V, 220V, 240V, 380V or 400V; single phase (one phase) or three phase (or tri-phase).
  • The parameters of recovery time and recovery rate are for reference purposes only. The actual parameters depend on the solvent type, impurity content and environmental temperature.
  • The heat transfer oil is ready, no need to pour the heat transfer oil into the new machine!

Optional Auxiliary Equipment: The Pneumatic Vacuum Device

The vacuum device is auxiliary equipment used for distilling the high (higher than 150¡æ) boiling point solvent. If equipped with the vacuum device, the boiling point of solvent will be able to reduce 30% to 40%, the solvent is very easily heat, the recycling rate and efficiency will increase significantly, and for example, when the vacuum meter pressure is -60cmHg, the boiling point of water from 100¡æ will down to 60¡æ

Technical Specifications

Capacity
40L
Combination with
Hy40Ex Solvent Recycling Systems
width(mm)
420
length(mm)
630
height(mm)
960
Net weight approx(Kg)
39

Optional Auxiliary Equipment: Pneumatic Feeding Pump

Capacity
60 L/min
Combination with
Hy40Ex Solvent Recycling Systems
Net weight approx(Kg)
15Kg

The pneumatic feeding pump may easily and continually or regularly pour the wasted or dirty solvent into the solvent recycling bucket instead of manual feeding, especially suited the solvent recycling machine with large recycling bucket, such as 125L, 250L and 450L.

Optional Auxiliary Equipment: Solvent Recycling Bags

The solvent recycling bags (recovery bags, distillation bags or liners) is suitable for all varieties of the solvent recycling machine except the machine equipped with 450L distillation bucket. Our solvent recycling bags meet, perhaps exceed all specification requirements of the customers, including dimensions, material thickness, and temperature & chemical resistance.